home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CD ROM Paradise Collection 4
/
CD ROM Paradise Collection 4 1995 Nov.iso
/
hamradio
/
dc.zip
/
DC14
/
README.DOC
< prev
next >
Wrap
Text File
|
1995-02-18
|
2KB
|
49 lines
DC CIRCUIT ANALYSIS
Version 1.4, March 1995
Copyright 1991-1995, Arthur Tanzella
All Rights Reserved
The DC Circuit Analysis program contains over 100 files occupying
approximately 800 KB of disk space, and compressed into a single self-
extracting file called "INSTALL.EXE." This file was created using the
LHarc version 2.11 program, which is a copyright reserved freeware program
written by Haruyasu Yoshizaki.
To run the program, requires a 286 or later microprocessor, an EGA or VGA
graphics' adapter with 256 KB of RAM installed, and a color monitor. It
also requires between 300 KB and 350 KB of available RAM after DOS, drivers
and Terminate and Stay Resident (TSR) programs are loaded. The actual
amount of RAM required depends on the complexity of the circuit, and
whether on not EMS memory is available.
To install the program, you must specify a drive with or without a
directory on the command line as follows:
INSTALL C: or INSTALL C:\DC14
It will create a directory called DC14 on the specified drive. If you
specify a directory, it will create the specified directory (if necessary)
and the DC14 subdirectory below the specified directory.
To use the program I recommend you print all the documentation files. The
DC.DOC documentation file includes a tutorial on semiconductors, logic, and
digital computer circuits. The documentation uses the IBM extended
character set. If you have an HP LaserJet printer, you should either set
the default symbol set to "PC8," or copy the following file to the printer
before printing the documentation files:
COPY /B LASERJET.BIN PRN
This file can be found in the same directory as the document files. To
print all the documentation files, I suggest using the following command:
COPY *.DOC PRN
To start the program, change the default directory to the directory
containing the DC.EXE program, and type "DC" as follows:
CD \DC
DC
You can now choose a sample circuit and analyze it. To exit a screen use
the "ESC" key. At the opening menu choose "Exit."